Monthly Archives: July 2014

What Causes Exterior Blistering When House Painting in San Ramon?

When house painting in San Ramon, the one thing nobody wants to see when the job is done is blistering in the exterior paint. In order to avoid having these appear, you will need to know what causes them. There are also ways to fix them if they show up anyway.

Blistering is what happens when the top layer of paint is separated from the layer underneath by air or water. Sometimes the possibility of blistering is apparent, while at other times it sneaks up on you. Either way, there are ways to avoid them so that it is less likely to happen.

Moisture is a big reason for blistering in exterior paint. If it has been raining or if the area was washed but not dried thoroughly, or if there is a leak, then moisture is in the area. Being careful to make sure that the entire area is dry and there are no leaks is one way to prevent moisture from causing blistering. This is obviously more important in humid areas, since there is more ambient moisture in those conditions. Choosing to paint an exterior surface on a dry, sunny day is the best option.

Mixing types of paint can also cause blistering. Because latex and oil paints do not respond the same way to heat, one will expand more quickly than the other and blistering will occur. There are primers that can be layered between paint types to help them bond more effectively. However, it is usually best to just paint the new coat with the same type of paint as was used previously.

Painting a new coat before the previous one is dry can also cause blistering. Because you are cutting off lower layers from the factors that speed drying, the upper layer is likely to dry first, leaving a layer that may still be releasing solvent vapors. These will blister, or bubble, because the upper layer will not allow it to be released into the air.

Additionally, if the area is not clean enough, residual dirt can cause blistering. Paint that is spread over dirty surfaces will not stick properly, and will pull away from the surface.

If you have done all you can to prevent blistering, but still find yourself faced with blisters in your exterior paint, the best way to handle it is to scrape the affected paint off, smooth it with sandpaper, dry it completely, and repaint. If the same area blisters again, check for leaks or other moisture traps in the wall behind it.

It is not always possible to prevent blistering when house painting in San Ramon, but if you know what to look for, you have a much better chance of avoiding them.

Using Eco-Friendly Painting Tips for House Painting in San Ramon

The environment has become very important to many people, due to a growing understanding of the effect of personal actions on it. Eco-friendly is a buzzword that can help find alternatives that have less of a negative impact when renovating or house painting in San Ramon. Eco-friendly painting techniques can help you get a new look without compromising your values and while still protecting the environment.

Volatile organic compounds (VOCs) are ingredients that are often used in commercial paint products that can affect your health and the environment in a negative way. These are especially bad when used in areas that have little or no ventilation. They are particularly bad for those who have allergies or sensitivities to them.

Since allergies and sensitivities to VOCs are fairly common, “green” paints that leave out these substances have become available. When you hire a contractor, you can request this sort of paint to be used. Natural ingredients make up these paints, and they usually have zero VOC. Low VOC paints are also available. Lacking toxins and not requiring cleaners with petroleum bases, these paints also have less negative impact on the environment.

Along with choosing a more environment-friendly paint, there are other things that you can do that can make your painting task more “green.” For instance, many painting tools are made of synthetic materials. If you choose to use natural, hand-made tools, you can often get a better quality product that will last much longer, with proper care. Besides brushes, you can also get a natural painter’s putty that contains ecologically friendly, non-toxic ingredients.

The painting contractor you choose in San Ramon will also have an impact. If you choose the right contractor, you can be sure that they will honor your requests to use eco-friendly paints and techniques. Some of the paint manufacturers who offer an eco-friendly line of paints include Sherwin-Williams, Benjamin Moore, Frazee Paints, Natural Interior Paint, and Dunn-Edwards Paint. There may be others, and these may not be available everywhere. The right painting contractor will know where to get eco-friendly paints if they are requested.

Before beginning a project, seal the vents and ducts to prevent dust or chemicals from getting into the system. This will prevent this type of contaminant from being circulated throughout the house. This applies both to the preparation, such as scraping old paint, as well as to the cleanup, when other chemicals may need to be used.

It is not difficult to maintain a healthy home, but it does take some thought and effort. These techniques and tips can help your house painting in San Ramon effort if you follow eco-friendly painting practices and lower the impact of repainting on your family or employees.

House Painting in San Ramon – Use the Tips When Adding an Accent Wall

While it has always been common when house painting in San Ramon or elsewhere to paint a whole room one color. Some people find that this becomes monotonous. To break up the sameness, an accent wall is an excellent possibility. An accent wall is a wall that is painted a different color from the rest of the room, but complementary, that adds interest.

Any room can have an access wall, even foyers or hallways. An accent wall goes well behind a focal point or the ‘odd man out’ of your furniture, to help to draw the room together. It can bring your personality to the room.

Choosing the color is not as difficult as it might seem. When you are using the accent wall as a focal point, choose a color that complements the rest of the room and is present in some piece or another of furniture. For instance, if you inherited a chair from your grandmother that does not really match the rest of your furniture, you can use one of its colors as an accent wall, and place the chair by that wall, and it will fit the room despite its differences. One of the colors that is present as an accent color – or your primary decorating color, but different from your wall color – is ideal.

While there is always a dominant color in a room, other colors should always be used to keep it from being overwhelming. The walls are often a neutral color, but an accent wall does not have to be neutral. It can be a bright or even patterned wall that helps to add interest and cohesiveness to a variety of colors in a room.
Some choose wallpaper, but stripes, a sponged or rag finish, or mural make great choices, if you would rather not have the accent wall a solid color. No matter what you choose, an accent wall will perk up your house painting.

The wall you choose is important, too. It is best for the accent wall to be a wall without doors or windows, unless you want to accent a picture window. However, if your room has a natural focal point, such as a fireplace, this would be an excellent accent wall. Otherwise, choose the wall where you have placed your focal point. Remember that an accent wall can change the apparent size and shape of a room, which can help alleviate apparent flaws. For an accent that is subtle, use a color that is just two or three shades different from the rest of the room.

If you want to get a professional opinion about an accent wall when house painting in San Ramon, painting contractors such as Custom Painting, Inc. can help you.